FREE UK DELIVERY
Suction - 2 x 0.5HP Motors
Two high-performance suction motors hold garments securely against the board, reduce fabric movement and draw away steam and moisture during finishing.
Aeolus TP08VS Industrial Ironing Table – Suction, Heated, Steam and Blowing
Industrial Ironing Station
Aeolus TP08VS - Suction, Heated, Steaming & Blowing Ironing Table
The Aeolus TP08VS is a complete industrial ironing station designed for high-throughput laundries, garment factories, knitwear producers, costume departments and hospitality groups.
Four professional finishing functions - suction, heat, steam and blowing - are combined on a 120 x 40cm stainless steel and aluminium ironing surface. The system includes a 10 litre stainless steel boiler, 5 bar steam pressure, powerful suction and blowing motors, electronic controls and a 900W professional steam iron.
The TP08VS is highly configurable, allowing the machine to be specified with additional irons, sleeve arms, steam guns, lighting, pedal kits, alternative board sizes and electrical configurations to suit the intended workflow.
10L Stainless Steel Boiler
5 Bar Steam Pressure
Heated Vacuum Board
Suction & Blowing
Electronic Controls
400V 3-Phase + Neutral
Professional Garment Finishing
Four Working Modes in One Industrial Station
1100W Heated Board
The stainless steel and aluminium ironing surface is heated to help keep the board dry, soften textile fibres and improve finishing speed.
Steam - 5 Bar / 10L Boiler
The integrated stainless steel boiler supplies professional steam at 5 bar working pressure to the included 900W steam iron.
Blowing - 0.5HP Motor
Reverse airflow creates an air cushion beneath the garment, helping protect delicate fabrics, linings, jackets, dark textiles and shaped garments.
Electronic Control Display
The electronic control panel provides centralised management of the table, boiler and finishing functions.
Energy-Saving Boiler
The 6kW boiler system is designed to provide dependable steam output while reducing unnecessary energy consumption between working cycles.
Integrated Garment Shelf
A built-in clothing shelf provides convenient space for staging garments before or after ironing.
Configurable to Your Workflow
Available with sleeve arms, second irons, pedal kits, steam guns, lighting, alternative iron weights and larger ironing surfaces.
Industrial Steam System
10 Litre Stainless Steel Boiler
The integrated 10 litre stainless steel boiler is designed for demanding professional ironing workloads, delivering steam at up to 5 bar working pressure.
The 6kW heating system supplies a 900W professional steam iron, while the large boiler capacity supports longer ironing sessions and reduces interruptions.
Stainless steel construction provides durability and corrosion resistance, although regular boiler maintenance and appropriate water treatment remain essential for long-term performance.
Boiler Capacity
10 Litres
Boiler Material
Stainless Steel
Boiler Power
6.0kW
Steam Pressure
5 Bar
Professional Iron
900W
Heated Board
1100W
Suction
2 x 0.5HP
Blowing
0.5HP
Technical Information
Aeolus TP08VS Full Specifications
| Manufacturer | Aeolus / EOLO |
|---|---|
| Model | TP08VS |
| Product Type | Industrial suction, heated, steaming and blowing ironing table |
| Standard Electrical Supply | 400V + Neutral / 50Hz / 3-phase |
| Alternative Electrical Supply | 230V / 50Hz configuration available on request |
| Boiler Capacity | 10 litres |
| Boiler Material | Stainless steel |
| Boiler Type | Energy-saving professional boiler |
| Boiler Power | 6.0kW |
| Steam Operating Pressure | 5 bar |
| Professional Iron | 900W professional steam iron |
| Ironing Table Function | Heated, suction and blowing |
| Heated Board Power | 1100W |
| Suction Motors | 2 x 0.5HP high-performance motors |
| Blower Motor | 0.5HP |
| Ironing Surface | 120 x 40cm |
| Ironing Surface Construction | Stainless steel and aluminium |
| Worktop Height | 92cm |
| Overall Dimensions | 59cm W x 160cm D x 94cm H |
| Control System | Electronic display panel |
| Garment Shelf | Integrated |
| Approximate Weight | 120kg |
| Installation Service | Not provided by TIECO |
| Installation Requirement | Installation and commissioning must be arranged by the customer using suitably qualified professionals |
Before Ordering
Installation & Site Requirements
Important Installation Information
TIECO Does Not Offer Installation for the TP08VS
The Aeolus TP08VS is a substantial industrial ironing system requiring suitable electrical services, site preparation and correct commissioning. TIECO does not offer installation for this product.
Installation must be arranged by the customer using a suitably qualified and competent electrical or mechanical professional. The appointed installer must review the official installation documentation before work begins.
The standard machine requires a 400V + Neutral / 50Hz three-phase electrical supply. A 230V configuration may be available on request, but this must be confirmed before ordering.
Do not arrange installation work using the website specification alone.
Always provide the installer with the documentation for the exact machine
configuration supplied.
Configure the Machine
Optional Accessories...
The TP08VS can be configured at the time of order. Contact us before purchasing to confirm accessory compatibility, electrical requirements and lead time.
Stainless Steel Arm
Suction Sleeve Ironing Arm
Double Pedal Kit for Both-Side Operation
Air and Steam Gun Kit
Steam Gun Kit
Steam Brush Kit
Wire Support with Rocker Arm
Wire Support, Rocker Arm and Work Light
Second Professional Iron Kit
Blowing Kit on Sleeve Arm
Left-Handed Professional Iron
Alternative Iron Weight Options
Maxi 50 x 130cm Board - 1600W
230V / 50Hz Electrical Configuration
Applications
Best Suited To
Industrial Laundries
For high-volume garment finishing and specialist pressing work.
Professional Ironing Facilities
Suitable for dedicated ironing rooms and large garment-care operations.
Knitwear Manufacturers
Blowing and steam functions support controlled finishing of shaped textiles.
Clothing & Garment Factories
For production finishing, samples, quality control and final presentation.
Hotels & Hospitality Groups
For uniforms, guest garments, specialist fabrics and laundry-room finishing.
Costume & Theatre Departments
Useful for shaped garments, delicate fabrics and mixed costume materials.
Questions? Call free on
0800 955 0245
SALE
RRP £8,398.80 inc. VAT
£6,795.00
ex. VAT
(£8,154.00 inc. VAT)
Usually delivered in 7-14 working days
Free UK delivery -
Delivery details
Aftersales support
Warranty from 2 - 5 years
Estimate only, get your quote today...
Subject to status, eligibility, credit criteria and approval
Authorised distributor:
Aeolus Eolo
Buying Advice
Is this product right for you?
The Aeolus TP08VS Industrial Ironing Table – Suction, Heated, Steam and Blowing by Aeolus Eolo is a industrial garment finishing table.
It is ideal when the table will be used for long working periods and productivity, steam control and consistent finishing quality are essential.
- Best for:
garment manufacturers, commercial laundries, dry cleaners and professional finishing departments with demanding daily workloads. - Consider a larger model if:
you require a specialist board shape, greater steam capacity or a fully integrated industrial finishing workstation.
Prefer to order over the phone?
Call free on 0800 955 0245 or Get a Quote
Join our mailing list for offers
From luxury hotels and universities to film studios, garment manufacturers, professional ironing services and fashion retailers, businesses across the UK rely on us for dependable commercial ironing equipment, garment finishing systems and laundry solutions.
Read Case Studies
Frequency Asked Questions (FAQs)
Find quick answers to common questions about this product.
This industrial ironing table is ideal for high-throughput laundries, garment factories, knitwear producers, hospitality groups, costume departments, and dedicated ironing structures.
The Aeolus TP08VS requires 400V 3-Phase + Neutral power supply. A 230V option is available upon request.
The Aeolus TP08VS offers four working modes - suction, heat, steam, and blowing - to enhance productivity, improve finishing quality, and reduce processing times.
Routine maintenance for the Aeolus TP08VS includes cleaning the surface, descaling the boiler, checking for wear on consumable parts, and ensuring proper ventilation.
The vacuum function holds fabric firmly against the board, allowing for sharper creases, faster drying, and preventing fabric shifting during ironing.
The heated stainless steel and aluminium board keeps fabric dry, lifts pressing performance, and is especially effective for heavyweight items and bedding.
Yes, the Aeolus TP08VS is built for serious daily volume and is designed to handle continuous use in commercial settings.
Recently viewed...
Related products...
Can't find what you're looking for? Try our Live Chat or call us on 0800 955 0245
UK Delivery
