A full-width 91.5cm rotary iron that handles shirts, bedding, tablecloths and heavy-duty textiles in the same session — seated, without effort, in half the time of a standard iron. Touchscreen and foot pedal control, continuous steam from below, 2-minute heat-up, and a variable-speed drum that runs forward or backward.
91.5cm / 36” Roller
30 g/min Steam Output
2200W
2-Minute Heat-Up
2L Water Tank
Technical Specifications
Model
R02036
Manufacturer
Speedypress
Roller Width / Pressing Plate
91.5 cm (36”)
Roller Diameter
150 mm
Rotary Speed
1.65 m/min (variable)
Rotation Direction
Forward and backward
Steam Output
30 g/min continuous
Steam Modes
Continuous steam or burst; dry press option on Wool, Cotton & Linen settings
The wide roller handles sheets, duvet covers, tablecloths and large garments in single passes. What takes multiple folds and passes with a standard iron is done flat and quickly — no creasing from folding required.
Steam from Below
Steam is distributed evenly upward through the pressing plate from beneath, penetrating the fabric from the underside. No dampening required beforehand; creases release on contact without any extra preparation.
Touchscreen & Foot Pedal
Touchscreen for temperature and steam settings; foot pedal opens and closes the pressing plate, keeping both hands free to feed and guide fabric. Slide the shoe forward or backward to change drum rotation direction.
5 Fabric Temperature Settings
Dedicated settings for Nylon (85°C), Silk (105°C), Wool (140°C), Cotton (165°C) and Linen (185°C). Wool, Cotton and Linen support dry pressing; Cotton and Linen additionally offer constant steam mode.
2-Minute Heat-Up & Auto Shut-Off
Ready to use in 2 minutes from cold. Auto shut-off after 15 minutes idle. If power is interrupted, the pressing plate can still be opened manually in compliance with IEC safety standards.
Soft Roller — No Shiny Spots
The highly elastic roller conforms around buttons, seams and ruffles without leaving pressure marks or shiny reflections. Dark fabrics, delicate collars and tricky pleats are all handled safely.
Five Times Faster — Seated, No Effort
The R02036 irons at up to five times the speed of a standard hand iron. The drum feeds fabric continuously at 1.65 m/min; you guide the garment in, it comes out pressed on the other side. No lifting, no repositioning, no standing over a board. The foot pedal controls the pressing plate, leaving both hands free throughout.
The 91.5cm roller width means a single-bed sheet passes through in two or three feeds rather than the dozen or more repositions required with a hand iron. Shirts take minutes once you have a little practice. The machine can be used on a worktop or with the optional floor stand — a removable cover is included for storage.
Roller Width91.5 cm (36”)
Rotary Speed1.65 m/min
Steam Output30 g/min
Heat-Up Time2 minutes
Power2200W
Product Documentation
Download the datasheet for the Speedypress R02036 below.
Exclusive UK & Mainland Europe Seller - Free DeliveryThe only seller of the R02036 in the UK and mainland Europe. Free delivery to UK and mainland Europe. Optional floor stand available separately.
Buying advice & support
Choose the right equipment
Tell us about your workload, space and installation
requirements. We will help you find a suitable solution.
UK commercial specialists
Support with equipment selection, delivery and aftersales
for professional ironing and laundry businesses.
Find quick answers to common questions about this product.
Yes, it is suited to businesses and larger households processing bedding, tablecloths, uniforms, shirts and mixed laundry regularly. Its 91.5cm roller is particularly useful for flatwork that would require repeated repositioning on a conventional ironing board. It is a practical choice where staff need to finish varied items while seated, rather than operating a high-volume industrial calender.
The machine requires a 220–240V, 50–60Hz electrical supply and has a 2200W power rating. It has an integral 2-litre water tank, so the supplied information does not specify a fixed water connection, drainage connection or external steam supply. Allow a stable worktop or purchase the optional floor stand, and check that there is room for the 1260 × 398 × 379mm boxed unit.
The 91.5cm-wide roller allows wide items such as sheets, duvet covers and tablecloths to be fed through in fewer sections. This reduces the repeated folding and repositioning associated with a hand iron, helping operators maintain a smoother finish across large panels. At a variable rotary speed of up to 1.65m/min, it can also help an accommodation laundry process routine flatwork more efficiently.
It offers five temperature settings for Nylon at 85°C, Silk at 105°C, Wool at 140°C, Cotton at 165°C and Linen at 185°C. The soft, elastic roller is designed to work around buttons, seams, ruffles and pleats without creating shiny pressure marks, which is useful for dark fabrics, delicate collars, shirts, trousers and uniforms. Dry pressing is available on Wool, Cotton and Linen settings.
Use distilled or de-ionised water where possible to help limit mineral build-up in the steam system. The 2-litre tank has an optical low-water warning, shown by a blinking steam light. The rotary iron heats from cold in around two minutes and automatically switches off after 15 minutes of inactivity, helping staff manage short production sessions and avoid leaving the heated plate operating unattended.
UK competitors and like-for-like products only. Terms apply.
We use cookies to measure how our site is used and to improve it. With your
permission we also use them for advertising. You can change your mind at any
time via Cookie settings in the footer.
Read our cookie policy